Skip to Content

King Kong Quick Adjuster

https://www.x-sway.com/web/image/product.template/3002/image_1920?unique=b3bd2cc

SKU 7020

Category: Adjusters

King Kong VW Rear Quick Adjuster for adjusting the preload on torsion bars in the rear of stock and new VW based cars including VW based race cars, buggies and Baja Bugs.


The Sway-A-Way King Kong quick adjuster is designed for off road race cars and buggies. It provides a quick and easy way to adjust your prelod and ride height on each torsion bar with out having to remove the spring plates and torsion bars. It welds in and has removable arms made from heat treated alloy steel and are plated with a black zinc plate to resist rust. Both the adjuster arm PN 7021 and 7023 will fit in the housing. The unit comes with the 40 tooth adjuster  PN 7023 with the standared 40 tooth inner spline. Adjustment is as simple as turning the adjuster screws on each side and provides about 2″ of total ride height adjustment. This provides for an easy and accurate adjustment of ride height, preload and corner weights. One turn on the adjuster screw is .88 degrees of preload on the bar. There are 3.52 degrees per inch of travel on a stock suspension.


These are commonly used in the class 5 baja bugs, 1-2 1600 cars and older race cars.

495.72 495.72 USD 495.72

495.72

Not Available For Sale

This combination does not exist.

Spring Plates Porsche